Behöver Du hjälp? Hör av dig! Ingen fråga är för dum för att ställa!
Beskrivning
Art.nr: 1034
Pathos Integrerade förstärkare är hybrider med Rör i klass A som driver förstegsdelen. Effektförstärkaren är bestyckad med transistorer som jobbar i Klass A och Klass AB. Rörens fina egenskaper ger ljudet en värme och närhet medan transistorerna på slutstegssidan bidrar med kraft, kontroll och dynamik. Flera av modellerna kan kompletteras med Pathos HiDAC som kan hantera digitala signaler med samplingsfrekvenser upp till 32b/384kHz. USB ingången kan även hantera DSD64/128
Pathos Kratos är en storebror till den otroligt populära Pathos Logos MKII och märkets i nuläget största integrerade förstärkare. - Kort och gott en Logos på steroider, fast med ett varmt och kontrollerat ljud som musikälskare världen över, helt har förälskat sig i.
Har Du plats, ekonomi och älskar musik är Pathos Kratos faktiskt ett fynd!
Kratos' name directly comes from its most important feature: power. In Greek mythology, indeed, Kratos was the god of strength, might and power.
Kratos is based on Pathos’ hybrid circuit, with tubes pre-stage and Mosfet final stage; it has 200W for each channel.
But that’s not all. Kratos’ pre-stage and final stage are clearly separated, with a prestigious pre-out and direct input to final stage; both pre-out and final stages are balanced XLR .
Its preamplification circuit is in pure class A; it uses Tung-Sol ECC803s tubes.
- Sound is warm, deep, dynamic!
Final Mosfet stage in class AB is strongly polarized in class A; its great power both at 8 and 4 Ohms makes Kratos able to drive any loudspeaker.
Kratos is also headphone amplifier with a dedicated circuitry (2 W @ 32 Ω).
Design is inspired by Logos, the great Pathos’ historic product. But this is a simple aesthetic affinity: similarities stops here. Kratos hides new technical solutions which make it the leading-edge-product between non-InPol amplifiers.
Kratos’ basic features (5 RCA, 2 balanced XLR, digital display, remote-controlled functions) could be improved by a DAC (optional) and a RIAA phono input (optional).
| Type | Hybrid stereo amplifier, fully balanced. Preamplifier stage: tubes, class A, 2 x TungSol ECC803S Final stage: Mosfet, bridge configuration, class AB |
| Output Power | 2 x 200WRMS @ 8 Ω, 2 x 350WRMS @ 4 Ω |
| Max input voltage | 5V RMS |
| Input sensitivity | 0,7VRMS |
| Input impedance | 47K |
| Pre out gain | 6dB |
| Gain | 36dB |
| Connections | |
| Analogue inputs | 2 balanced XRL line, 5 unbalanced RCA line, 1 balanced XRL direct to the power amp |
| Optional inputs | HiDac Mk2 Phono stage RIAA for MM/MC |
| Outputs | 1 Pre out stereo unbalanced RCA, 1 Pre out stereo Balanced XLR |
| Headphone Specifications | |
| Output power | 3,3 W @ 16 Ω , 2 W @ 32 Ω |
| MAx output level | 10V RMS |
| Dimensions | |
| Amplifier | 430mm (D) x 530mm (W) x 195mm (H) |
| Weight (net / packed) | 40Kg |
s