• Fri frakt på order över 3000:-
  • Betala säkert med kort
  • Flera olika betallösningar
  • Vi hjälper dig gärna om Du är osäker på något!
  • Frågor? Ring oss! 08-520 21347
0
Varukorg
Din varukorg är tom
Pathos Logos MKII
Pathos Logos MKII
Pathos Logos MKII - 2
Pathos Logos MKII - 3

Pathos Logos MKII

63 990 SEK
Läs mer...
Färgval
Pris
Padouk wood
63 990 SEK
Svart
63 990 SEK
  • Betala säkert med kort
  • Maila oss, vi svarar snabbt!
  • Vi prismatchar gärna!
  • Frågor? Ring oss! 08-520 21347
  • Flera olika betalningslösningar
  • Fri frakt på order över 3000:-

Behöver Du hjälp? Hör av dig! Ingen fråga är för dum för att ställa!

    Beskrivning

    Art.nr: 942

    Pathos Logos är en förstärkare som vi genom åren har varit löjligt förälskad i.

    Anledningarna har varit många. Ljudet, designen och att den i prissegmenet är mycket svårt att slå…
    Det är en rörhybrid, vilket betyder att man kombinerar det bästa från två världar! Som slutsteg, sitter det en Class A/B MOSFET förstärkare som levererar 110 watt per kanal i 8 ohm och rör på försteget som tillsammans spelar i ljuvlig harmoni.

    Dessutom tillverkas de för hand i Italien, fjärrkontrollen levereras i trä!



    Pathos Logos MKII


    Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music.

    E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII.

    Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music.

    Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thinked in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device.

    Care for details

    As regards the first kind of solutions adopted in the new Logos we find an increased voltage of anodic polarization of the valves in order to optimize the working point of the same and obtain greater linearity and thus a general improvement of the sound in particular an increase of the consistency and definition. Stabilized power supply for preamp valve and a more accurate collocation of electrolytic capacitors throughout the signal path (and in particular close to each mosfet) allow to have a valuable reserve of "quick energy" that while listening they mean better dynamics, detail and sense of rhythm.


    A comfortable listening

    Numerous innovations also regarding the practicality of use that they assist pleasantly the owner in the use of the amplifier, we find: volume levels can be stored for each input, the gain differentiation between digital and analog inputs so as to ensure homogeneity of the a level between the different sources used, standby function from the remote control respectful of energy consumption limits imposed by the latest EEC regulations,

    Digital music

    The ability to have an optional high quality DAC 24bit-192Khz integrated into the device enriches the set of connections with the addition of 2 SPIDF digital inputs and 1 USB input, which allow a really meaningful versatility in the management of digital sources and let Logos MkII stand as an ideal amplifier for the use of digital Music.

    Expected snags!

    A new protection has also been implemented against short circuits and overloads by a “Hall” effect sensor that allows the device to protect itself against shorts caused by speakers and by internal malfunctions, preserving in this case also the speakers and at the same time without diminishing the quality of the musical signal.

    Prose

    Logos is a hybrid amplifier of 110W per channel into 8 ohms and 220W into 4 ohms with ECC88 preamp valves, end-stage class A / B Mosfet strongly polarized, fully balanced signal until the valve that allows you to take full advantage of a balanced source as Pathos Digit and Pathos Endorphin, volume control purely resistive analog circuitry with digital control and input and output impedance constant, lamellar transformer resin and encapsulated to zero dispersions, brightness display adjustable and all functions remote controlled.


    Tekniska specifikationer:


    TypeIntegrated stereo amplifier, Hybrid technology. Preamplifier stage Tube (2x6922 ECC88), class A Final stage; Mosfet, class AB
    Output Power2 x110 W RMS@8Ohm (Both channel driven)
    Frequency response5Hz - 140KHz ± 0,5dB
    Max input voltage6V RMS
    Input sensitivity500mV RMS (39dB Gain)
    Input impedance32KOhm unbalanced, 20KOhm balanced
    Output polarityNon- inverting. Balanced pin 2 +
    Volume regulatorBurr Brown PGA2310 (100 steps)
    Dumping Factor360@8Ohm
    THD0,02% @ 1W; 0,2% @ 110W
    S/N Ratio>90dB
    Power requirements200W @ 100WPC / 130W @ zero volume < 0,5W@standby
    Connections 
    Analogue inputs2 balanced XRL line, 5 unbalanced RCA line
    Outputs1 Pre out stereo line, 1 sub out mono line
    Digital inputsInstallation of (optional) HiDac board is required to enable these inputs
    1 USB port type "B", 2 SPDIF coaxial
    Driversavailable for Windows up to 8 and Mac OSx up to 10.09;
    for Mac OSx 10.10 and later we suggest M2Tech HiFace adapter (optional)
    Dimensions 
    Amplifier420mm (D) x 430mm (W) x 170mm (H)
    Packed600mm (D) x 600mm (W) x 350mm (H)
    Weight (net / packed)28Kg / 30Kg
    Tillbaka till toppen